Location:  home > Screening&Washing Equipment


Spiral Sand Washing Machine

Spiral Sand Washing Machine



quarry, minerals, building materials, transportation, chemical industry, water conservation and hydropower, cement mixture station, etc.


River pebbles, granite, basalt, iron ore, limestone, calcite, quartz stone, diabase and so on.

Email: dbmcrusher@gmail.com


Product description:

Log washer also called as spiral washer which is widely used in washing off silt and stains from manganese ore, iron ore and other low-grade mineral. Also it suitable for scrubbing material which contains tough insoluble clays, conglomerates or soft stone.

This machine drive the spiral stirring shaft depends on speed reducer and rotate in different directions, and the minerals which enter the tank were washed by water and stir strongly by blade. The sewage was overflowed at the end of tank, the cleaned minerals were lifted up along the blade and discharged at the beginning of tank.

Product advantages:

1.sprial sand wash machine is designed for scrubbing materials such as tough insoluble clays, conglomerates, soft stone and cemented aggregate, which is difficult to process

2.High capacity

3.Heavy duty conveying paddles

4.Fabricated with heavy duty tubs

5.Oversize bearings and gears

6.Thick-walled shafts

7.Lower end bolted to fully machined stub shaft. Upper end mounted through flexible coupling to output shaft of gearbox

8.The compound drive divides the operating load over an optimal combination of oversized helical and spur gears

9.Continuous grinding and abrading log washer paddles

10.Adjustable water discharge gates on both sides of lower end of the tub

Working principle:

Tilted installation forms a sedimentation tank at the machine end. Screw head enters into tank. Screw be driven by motor and reducer and cleaning water enters into sedimentation tank from the bottom. Thus it completes the three functions of washing, dewatering, classifying.

Washing: Sand enters into tank and grinds under the rotating screw effect. The impurities covered on the sand be removed and sand moisture layer be damaged for easy dewatering. The cleaning water injected from machine bottom forms a flow and it sends the fine particles and impurities to the surface, then finally be overflowed from weir.

Dewatering: Heavy sand sinks into tank bottom and in the side of curved plate. Screw pushes sand up and forward. The excess water be removed. The removed water flows into tank through gutter from other side, while the dewatered sand be discharged from the tank top.

Classifying: The classification function is accomplished by overflowing fine particles. We can control it by adjusting weir height and screw speed

technical parameters:

Pre: Vibrating Screen Next: 没有了

If you have any questions,plese contact us,we will reply with in 24 hours!